VIDEO

Informace

Lincoln

Lincoln B1961

See the basic definition of a diagnostic error. This will help you to clarify the main causes of the fault code. You will understand the program of the control unit
Basic DTC analysis according to OBD2 protocol standard.

OBD2 or On-Board Diagnostics displays messages for basic group styles. More comprehensible code composition has been standard since 2000. The DTC code consists of five characters and its composition will be shown in this video

Insight into programming

The basic unit for the operation of any computer is the bit. Logic 0 and 1 are expressed by a single bit. Diagnostics The error code is composed of 16 bits. The first two bits define one of the four basic circuits. The video will show you a comprehensive overview of the composition of the error report

A diagnostically understandable description of the Diagnostic Trouble Code

Lincoln B1961

Basic error definition

Inlet Valve, Right Rear Wheel. Fault In The Valve Coil Circuit

Cause of DTC

Diagnostic trouble code (DTC) ABS-411, ABS-412, ABS-413, ABS-414, ABS-421, ABS-422, ABS-423 or ABS-424 is stored (depending on the valve coil) if the control module registers that the signal from the valve coil (either activated or deactivated) is shut off for more than 20 ms. One of these diagnostic trouble codes (DTCs) will also be stored if the signal from the valve coil is shut off for more than 10 ms when testing the valve and pump motor. The valves and pump motor are activated during ABS control and when testing the valve and pump motor. The control module carries out the valve and pump motor test the first time the car reaches 6 km h each driving cycle as long as the brake pedal is not depressed. The test is carried out at 15 km h if the brake pedal is depressed.