VIDEO

Informace

Nissan

Nissan B1150

See the basic definition of a diagnostic error. This will help you to clarify the main causes of the fault code. You will understand the program of the control unit
Basic DTC analysis according to OBD2 protocol standard.

OBD2 or On-Board Diagnostics displays messages for basic group styles. More comprehensible code composition has been standard since 2000. The DTC code consists of five characters and its composition will be shown in this video

Insight into programming

The basic unit for the operation of any computer is the bit. Logic 0 and 1 are expressed by a single bit. Diagnostics The error code is composed of 16 bits. The first two bits define one of the four basic circuits. The video will show you a comprehensive overview of the composition of the error report

A diagnostically understandable description of the Diagnostic Trouble Code

Nissan B1150

Basic error definition

Cylinder 4 Misfire Detected

Cause of DTC

Battery voltage: 8 V or more VVT system: Not operated by scan tool Engine RPM: 450-6500 rpm Either of the following conditions (a) or (b) is met: (a) Engine coolant temperature at engine start: More than 19.4°F (-7°C) (b) Engine coolant temperature: More than 68°F (20°C) Fuel cut: OFF Monitor period of emission-related misfire: First 1000 revolutions after engine start, or Check Mode: Crankshaft 1000 revolutions Except above: Crankshaft 1000 revolutions X 4 Monitor period of catalyst-damaged misfire (MIL blinks): All of the following conditions 1, 2 and 3 are met: Crankshaft 200 revolutions 1. Driving cycles: 1st 2. Check mode: OFF 3. Enine RPM: Less than 2300 rpm Except above: Crankshaft 200 revolutions X 3