VIDEO

Informace

Jeep

Jeep P0092

See the basic definition of a diagnostic error. This will help you to clarify the main causes of the fault code. You will understand the program of the control unit
Basic DTC analysis according to OBD2 protocol standard.

OBD2 or On-Board Diagnostics displays messages for basic group styles. More comprehensible code composition has been standard since 2000. The DTC code consists of five characters and its composition will be shown in this video

Insight into programming

The basic unit for the operation of any computer is the bit. Logic 0 and 1 are expressed by a single bit. Diagnostics The error code is composed of 16 bits. The first two bits define one of the four basic circuits. The video will show you a comprehensive overview of the composition of the error report

A diagnostically understandable description of the Diagnostic Trouble Code

Jeep P0092

Basic error definition

FUEL PRESSURE 1 CONTROL CIRCUIT HIGH

Cause of DTC

The Fuel Quantity Solenoid (FQS) works in tandem with the Fuel Pressure Regulator (FPR) to control fuel volume and pressure in the Fuel Rail. The FQS is positioned in the inlet side of the High Pressure Delivery Pump (HPDP). The FQS receives 12 Volts and a duty-cycle ground signal from the Powertrain Control Module (PCM). The FQS is normally open, so when the FQS is not actuated (no ground signal from the PCM), the HPDP inlet passage is open allowing full fuel flow to the pumping chambers inside the HPDP. When the PCM grounds the FQS control signal the FQS closes the fuel inlet passage, preventing fuel from entering the pumping chambers. The FPR is positioned at the return passage of the Fuel Rail. The solenoid receives 12 Volts from the PDC and a duty-cycle ground signal from the PCM. The FPR is normally open and when the solenoid is not actuated (no ground signal from the PCM), the Fuel Rail return passage opens allowing fuel pressure in the rail to escape into the return circuit and on to the Fuel Tank. When the PCM grounds the FPR control signal, the solenoid valve closes allowing fuel pressure to build in the rail. The Fuel Pressure Regulator is not serviceable separate of the Fuel Rail Assembly.