VIDEO

Informace

Dodge

Dodge B2847

See the basic definition of a diagnostic error. This will help you to clarify the main causes of the fault code. You will understand the program of the control unit
Basic DTC analysis according to OBD2 protocol standard.

OBD2 or On-Board Diagnostics displays messages for basic group styles. More comprehensible code composition has been standard since 2000. The DTC code consists of five characters and its composition will be shown in this video

Insight into programming

The basic unit for the operation of any computer is the bit. Logic 0 and 1 are expressed by a single bit. Diagnostics The error code is composed of 16 bits. The first two bits define one of the four basic circuits. The video will show you a comprehensive overview of the composition of the error report

A diagnostically understandable description of the Diagnostic Trouble Code

Dodge B2847

Basic error definition

Invalid Data Received From Power Steering Control Module: No Sub Type Information Diagnosis: A continuous and on-demand DTC that sets when the PAM receives an invalid network data from the Power Steering Control Module (PSCM) with a faulted signal data input and or a loss of PSCM synchronization occurred. RETRIEVE and REPAIR all non-network DTCs in other modules on the network. If no DTCs are present in the PSCM drive the vehicle above 50 km h (30 mph) for a minimum distance of 1 mile while maintaining a straight ahead vehicle position for at least 30 seconds (this drive cycle needs to occur if the battery has been disconnected or if vehicle is new). If the active park assist is still inoperative and the U0420:00 DTC does not return after driving the vehicle for 1 mile and clearing DTCs . DIAGNOSE the observable symptom.

Cause of DTC

no enought data