VIDEO

Informace

Dodge

Dodge C2205

See the basic definition of a diagnostic error. This will help you to clarify the main causes of the fault code. You will understand the program of the control unit
Basic DTC analysis according to OBD2 protocol standard.

OBD2 or On-Board Diagnostics displays messages for basic group styles. More comprehensible code composition has been standard since 2000. The DTC code consists of five characters and its composition will be shown in this video

Insight into programming

The basic unit for the operation of any computer is the bit. Logic 0 and 1 are expressed by a single bit. Diagnostics The error code is composed of 16 bits. The first two bits define one of the four basic circuits. The video will show you a comprehensive overview of the composition of the error report

A diagnostically understandable description of the Diagnostic Trouble Code

Dodge C2205

Basic error definition

Torque Converter Clutch (TCC) System - Stuck On

Cause of DTC

P0742 No input speed sensor (ISS) DTCs P0716 or P0717. No output speed sensor (OSS) DTCs P0722 or P0723. No TCC performance DTC P0741. No TCC electrical DTCs P2763, P2764. Ignition voltage is between 8-18 volts. The transmission fluid temperature is 20-130°C (50-266°F). The engine speed is 500-6,500 RPM. The engine torque is at least 50 N·m (37 lb ft). The throttle position is 8-90 percent. The commanded gear is not 1st gear and the gear ratio is 0.66:1-1.71:1. The vehicle speed is greater than 16 km h (10 mph). TCC is commanded OFF.