DTC P0202 Dodge
Evaporative Emission (EVAP) System Flow During Non-Purge
Evaporative Emission (EVAP) System Flow During Non-Purge
Description
DTCs P0107, P0108, P0112, P0113, P0116, P0117, P0118, P0121, P0122, P0123, P0125, P0442, P0443, P0446, P0449, P0452, P0453, P0455, P1106, P1107, P1112, P1114, P1115, P1121, P1122 are not set. The ignition voltage is between 10-18 volts. The barometric pressure (BARO) is more than 75 kPa. The fuel level is between 15-85 percent. The engine coolant temperature (ECT) is between 4-30°C (39-86°F). The intake air temperature (IAT) is between 4-30°C (39-86°F). The start up ECT and IAT are within 9°C (16°F) of each other. The vehicle speed sensor (VSS) is less than 121 km h (75 mph).
Cause and Solution
The EVAP system tests run when the engine is first started and meets the Conditions for Running the DTC. An intermittent condition could be caused by an improperly installed or damaged EVAP canister purge solenoid valve, or by a temporary blockage in the EVAP canister purge solenoid valve. For intermittent conditions refer to Intermittent Conditions .
Video Guide
Diagnostic Info
- DTC Code: P0202
- Brand: Dodge