DTC P0107 Audi
Manifold Absolute Pressure Barometric Pressure Sensor Circuit Low Input
Manifold Absolute Pressure Barometric Pressure Sensor Circuit Low Input
Description
Engine started, the temperature must beat least 185-degrees (F) and all electrical equipment (A C, lights, etc) must be off. The ECM detected the BARO sensor was out of range during the CCM test. The BARO sensor signal should be in 4.5v. The BARO sensor is a variable capacitance unit used to detect altitude.
Cause and Solution
Sensor has deteriorated (response time too slow) or has failed
MAP sensor signal circuit is shorted to ground
MAP sensor circuit (5v) is open
MAP sensor is damaged or it has failed
BARO sensor signal circuit is shorted to ground
BARO sensor circuit (5v) is open
BARO sensor is damaged or it has failed
ECM is not connected properly
Video Guide
Diagnostic Info
- DTC Code: P0107
- Brand: Audi